Hi-Res Mirror Easy-Fit Reversing Camera kit -Black Twin Lens CCD Camera- EW3222B

Hi-Res Mirror Easy-Fit Reversing Camera kit -Black Twin Lens CCD Camera- EW3222B
Hi-Res Mirror Easy-Fit Reversing Camera kit -Black Twin Lens CCD Camera- EW3222B
Hi-Res Mirror Easy-Fit Reversing Camera kit -Black Twin Lens CCD Camera- EW3222B
Hi-Res Mirror Easy-Fit Reversing Camera kit -Black Twin Lens CCD Camera- EW3222B
Hi-Res Mirror Easy-Fit Reversing Camera kit -Black Twin Lens CCD Camera- EW3222B

Hi-Res Mirror Easy-Fit Reversing Camera kit -Black Twin Lens CCD Camera- EW3222B
This is our Hi-resolution mirror mount monitor. This monitor has the 4 pin screw easy-fit wiring. This means all you have to do is provide power to the monitor and the monitor will power the cameras on an all in one cable with waterproof connectors at the end. The monitor clips over your existing rear view mirror with spring loaded clips on the rear of the screen. The buttons on the right hand side of the screen are touch sensitive and allow you to turn the monitor on and off easily or switch channels with a gentle press of the glass on top of the buttons icon.

The screen comes in at a resolution of 800wRGB480 whereas the standard screens are 480RGB234 (although some retailers will multiply the first number by 3 for the RGB element of the pixels to make it look big eg 1440x234). Put this digital Hi-res monitor next to a standard analogue screen and you see so much difference. Display size : 7 Diagonally Measured Power Consumption : 7.5W Power : 12V-24V TV System : PAL/NTSC (Auto detect) Resolution : 800(w)RGB480(H) Video Input : Dual Video Inputs. Blue screen when no signal input.

This camera is best mounted high up, ideally 6 foot or over, it is best mounted on vans, motorhomes or similar vehicles and not really for cars. The angle of view is approx 90 degrees for the camera looking down and 60 degrees for the camera looking back as the rear view.

This narrower angle camera allows you to judge distance better than the wider angle cameras. The image outputted is mirror imaged to give you a true perception of what your mirror would have seen if you were driving. There are night vision Infra Red LED's to help see in pitch black conditions. Each camera can be adjusted to tilt up and down by undoing the screws with the allen key provided and taking the camera apart, setting the angle and then tightening the screws back up again.

This model comes with the stainless steel bracket to help reduce the risk of corrosion. Image Sensor: 1/3 Sony 811 700TVL CCD Camera angle: 120 degrees and 70 degrees Waterproof IP68, shockproof, DC12V (our easy wire monitors drop voltage from 24V to supply camera at 12V) Size: 100mm wide, 87mm high, 50mm depth (diameter of camera body) Resolution: 700TVL. The item "Hi-Res Mirror Easy-Fit Reversing Camera kit -Black Twin Lens CCD Camera- EW3222B" is in sale since Wednesday, September 16, 2015. This item is in the category "Vehicle Parts & Accessories\In-Car Technology, GPS & Security\Parking Assistance\Camera, Monitor & Sensor Kits". The seller is "cbeeeeee1111111" and is located in Ramsgate.

This item can be shipped to European Union member countries, Australia.
Hi-Res Mirror Easy-Fit Reversing Camera kit -Black Twin Lens CCD Camera- EW3222B


Night Vision Kit    Links    Contact Form    Privacy Policies    Terms of service