Citroen Relay Brake Light Twin Reversing + Rear View Camera Rear View Kit

About the brake light camera in this kit. This is our very latest addition to the brake light camera kits. We have had the single-lens version of this camera for a number of years now, we were frequently told by customers that they would love an option to view behind whilst driving (like our twin-lens cameras), well after some development with one of the factories we use we are finally able to offer this fantastic solution. Two cameras in a tidy "factory look" housing, the old light strip is removed from your old light and placed into this camera housing.

Run the cable to the monitor, supply power and that is it we even do a lighter plug option to make it even easier if required. Please note:- some early rare models of this van have a different style brake light that bolts from the rear, the majority have the screw from the front version as used in this kit. If you can see screws when viewing your van from outside then this kit should fit. This is one of our latest models, where the. Monitor powers up the camera.

Down an all in one cable. This makes the system easy to fit and avoids canbus issues that may arise on normal systems due to taking power supplies for the camera from the reversing light. Monitor has Digital LCD Panel - Not Standard LCD. With more than 3 times the amount of pixels of the standard analogue LCD screens most other retailers sell. Please note some sellers multiply the first number by 3 for RGB, if we were to do that it sounds even more impressive (2400x480).

We prefer to keep it simple but check carefully our competitors, the last number is normally better to go by as this is the number of vertical lines of pixels. This particular system uses two of the 700TVL new generation CMOS sensors, which is right on the upper scale of picture quality. With us, meaning we will repair or replace any non-user damaged parts that are deemed faulty. Our failure rate is very low even beyond these two years, if you have a problem outside of 2 years we should still have compatible parts and possible repairs for reasonable amounts. Parts Tested in the UK.

The parts of this kit will have been tested twice, once by the factory and once by us. We check all the items in the kit including all cables, trigger wires, IR leds and menu functions to reduce any chance of having a non working part.

Our fault rate is extremely low, and we just like to ensure that we avoid any imperfection slipping past. This is why professional fitters love us. 7 Diagonally Measured Colour LCD screen Power supply: 12V/24V Power Consumption: 7.5W Max Digital Screen Resolution: 800 x3(RGB)x480 21 LED Backlight (Brighter than other 14 LED versions) 2 Inputs PAL/NTSC/AUTO. Effective Pixels: 976(H) x 592(V).

Min illumination: 0.1 LUX. View angle: V 65 degrees, H 80 degrees D 105 degrees. Camera lens adjustment: 20 degrees up and down.

Operating temperature: -20 to 70 degrees C. Certificates: FCC, CE, E-mark, RoHS. Min illumination: 0.0 LUX (IR LED on). View angle: V 85 degrees, H 130 degrees D 160 degrees. Guideline: Optional (some have a trigger wire to select).