The NiteSite Viper is able to achieve this status by using a powerful infrared illuminator which is invisible to people and animals. The NiteSite is able to illuminate the target area where the rifle scope is aiming, this allows for clear target identification up to 100 metres (110 yards) away.This infrared image is then captured through the rifle scope by a compact digital camera unit attached to the scope's eyepiece and a live feed is then played back to the hunter via the unit's integral 3.5 inch LCD screen. Like all NiteSite products, the NiteSite Viper utilises infrared illumination in a unique way, making it more affordable, reliable and user friendly than traditional light amplification technologies, delivering crisp, ultra-clear night vision, regardless of ambient light conditions. The true beauty of a NiteSite Viper is that it converts any day scope (there's no need to remove it) into a powerful night vision system that is quick and simple to set up. Indeed, from opening the carry case to hunt ready status takes just 60 seconds once you are familiar with the setup. All NiteSites are equipped with adaptable fittings that enable mounting onto virtually any make and size of scope and there is no need to re-zero or adjust your scope in any way. Just mount the unit, switch on and you're ready to shoot. Brief Summary of the NiteSite Vipers Specifications. Identification Range: 100 meters (110 Yards) Usable Calibre: Any Weight (excluding battery): 418g Operational run time: Up to 7.5 hours IR Frequency: 850nM IR LED's: 1 Display screen: 3.5 inch Operating Temperature: -20° to 60° (-4°F to 140°F) Video output: 3.5mm 4 pin jack Water resistantRange subject to individual optics / weather conditions.
Heavy duty field carry case. A robust carry case, fully padded with laser cut high-density ergonomic foam, makes transporting easy and ensures all components are held firmly and are heavily protected from the inevitable knocks the case will endure in the field.
Large clasps make unlocking the case easy in night vision conditions. Illuminator module and viewing screen. The scope mounted module houses 1 powerful (IR) illuminator delivering a range of up to 100m. An ergonomic'dimming' knob allows accurate control of the illumination power to reduce flare for closer range targeting. The hooded front has an inset protective lens cover.
The rear of the module features a 3.5 inch LCD viewing screen. Connection to the camera unit is via a 90 degree male three pin jack plug and cable. The base features a patented'T' bracket that connects securely to the Anti recoil clamps'T' slot. The rugged module houses a infrared (IR) frequency camera 1.0 Lux 600TVL 1/3 CCD CMOS sensor (PAL or NTSC) 4:3 ratio.A large push button on/off switch is located on the rear face of the module for easy night operation. The Viper is supplied with a 1.5Ah lithium-ion polymer scope mounted battery with adjustable Velcro fastening. 1 x 12 volt lithium-ion charger with charging indicator. Red light indicates the battery is charging. The green light indicates the battery is fully charged.
Always use the correct charger supplied with the NiteSite battery product. 35mm or 40mm diameter rubber sleeves provide a secure, stable connection from the scope's ocular to the camera unit. The heavy duty rubber construction is flexible enough to stretch over most rifle scope eyepieces although the first application of the scope sleeve over larger diameter eyepieces (44mm plus) can be assisted by softening the sleeve in hot water. 25mm and 30mm diameter clamps are included enabling mounting to most rifle scope body tubes.Larger scope clamp sizes are also available in 32mm and 34mm for bigger diameter scope body tubes. 1 x adjustable anti-recoil clamp.
The removable plastic clamp connects to the top of the scope clamp and ensures that the illuminator module stays firmly in the'T' slot even during the most powerful recoil actions. 1 x pack of five filters. Adhesive screen filters reduce screen glare to suit your environment and personal preferences. Multiple anti-glare filters can be used, progressively darkening the screen with each filter applied. Designed to help you get the most from your NiteSite.It covers all aspects of set up, operation and care of your equipment. 1 x 24 month guarantee card. Covers you against electrical and mechanical breakdown. Note: Battery packs are guaranteed for 12 months.
The item "Nitesite Viper Night Vision Kit" is in sale since Friday, October 12, 2018. This item is in the category "Sporting Goods\Hunting\Night Vision". The seller is "opticswarehouseltd" and is located in UK. This item can be shipped to United Kingdom.