Reversing Camera Kit for Van, 2pcs Backup Cameras Waterproof Night Vision with 7 inch Monitor +66ft 4 PIN Car Rear View Camera Cable for Bus Truck Trailer RV Campers Motor Home. The ANDUBEST wired reversing camera kit is HD image sensing, which gives you a true and natural colour image with no colour deviation, fully waterproof and IP69K rated. It can work in rain, snow and at night. With the reversing camera you can easily and safely park or drive, even in crowded streets and car parks. The 7-inch rear view monitor has a pixel resolution of 800 x 480, providing you with a clear image display in real time.
The two camera images can be switched between for display viewing. This will allow for a focused full screen display of details.
The rear view monitor and the reversing camera are connected with an HD video cable. It works with an integrated power supply of 12V-24V from the car. The signal is more stable than a wireless camera, you don't have to worry about image loss and blurred video.
Thanks to 16 infrared lights, the van's rear view camera can see even in total darkness! The camera has an ultra-wide 140° viewing angle and provides a complete view from the rear of your vehicle. This ensures complete safety with no blind spots. The power supply is 12V-24V from the car cigarette lighter, one-key switch, and plug-and-play.
It provides real-time protection for your safe driving. The 20-meter extension cable is included to meet your diversified needs, so it is suitable for both hatchback, SUV, crossover, estate car, mini-van, MPV, cargo van, etc. This reverse parking sensor system is the driver's third eye. Make driving easier and safer. The cigarette lighter powers the entire system, so installation is so simple!Connect the camera to 12V-24V, it can be used as a full-time rearview monitor or as a security monitor. For novice drivers and large machinery operations, it is undoubtedly a good helper. The monitor shows a blue screen and does not show any signal? To perform a hard reset, unplug all cables and power cords and leave them for 1 minute, then plug them in again. Check if the connection with the camera has been established. No image on the screen? Check if the camera is on the correct camera input. Check if the cable is connected to the monitor. Check if the camera is connected to the cable. Video input: AV1/AV2 (AV2 reverse priority). 3 installation methods: A, desktop (please remove the protective frame outside the monitor first); B, hanging suction cups; C, comprehensive. Reversing camera (18 infrared lights). Trucks, vans, tractors, harvesters, horse boxes, horse trailers, motorhomes, station wagons, buses, caravans, vans.